Drift Fishing For Crappie: A Productive Way To Catch Some Big Crappie
Posted: Saturday, February 16, 2008
by Mark Fleagle
oldfishinghole.com
Equipment You Will Need:
- Boat
- Trolling motor
- Marker buoys
- Light Spinning Tackle
- Crappie rigs
- Marker buoys
- Jigs
How to Set Your Drift for Crappie Fishing Locate the winds direction and set you boat in position to drift along the break. (change in bottom depth) Make sure your boat drifts along the deeper side of the break. You will use your trolling motor to keep your drift in position along the deep side of the break. If you don't have a trolling motor your have to use you boat motor to get back in position. (this can spook the fish, thats why a trolling motor is recommended. The Depth finder will be your guide to stay along the deep side of the break, and to locate the fish. Set up a weighted crappie rig to just touch bottom with sinker position your baits about 18 to 24 inches off the bottom. As you drift, watch the rod tip, it will bounce up and down slightly as the weight drags along the bottom. If the tip of the rod remains still the sinker is not in contact with the bottom. When you catch the first fish drop one of your marker buoys to mark the spot. Continue to drift until another fish is caught or about 75 yards, then drop another buoy. This marks your drift location for a return drift or anchor position. Drift about 50 more yards past the second buoy then start up your boat motor and go around the buoys approximately 75yards away. Know move your boat back in position for another drift. Normally the school will be concentrated in one area. Keep working the spot until you get no more bites. If your lucky you can catch your limit and a short time.
You can use this technique on any body of water so have fun! And good luck
This Article has been viewed 1,134 times. (Not updated in real-time.)
No comments yet.We want your comments! If you can read this, you don't have javascript enabled, so you can't use this comment system. Please enable javascript.